Black Friday Sale, 10% off Storewide. Discount will be applied automatically at the checkout.

2024 Silverado

"2024 Chev Silverado LTZ. Quick easy install. No running wires down A-Pillar. No tapping into OBD-2. For a quick and easy install."---Gordon Nash

Audi A5 coupe 2011

Easy to install, looks perfect.

---Miguel Angel Gonzalez

KIA Sportage

"The whole ordering and shipping process was good. It was delivered in about a week. The cable and connectors are a tight fit in the Kia Sportage. I managed to squeeze it in there and make it look neat."---George

Hyundai Ioniq 5

"This was one of the easiest installation I've done in a while in my personal fleet of vehicles. This one i installed on my Ioniq 5. All i had to do was remove the small cover above the rear view mirror which gave me access to the 10 pin connection. Connect it and tuck the wires, and its done. I like that the converter unit has a screen to show the current voltage flowing through the unit when it is on."

---Chard

Cadillac XT5

"Before I purchased the D3-019 FITDVR for my Cadillac, I did remove the mirror cover and made sure of the 10 pin square connector was correct. When i installed it, space was limited under the cover but a little common sense wire routing making sure not to place wire in front of the rain sensors It all fit and I was able to re-install the mirror cover without too many issues. I then hooked up my Radon XP detector to the 12 volt input. I also had purchased the proper adapter for it on their website as it required a RJ-11 connector. It looks good and I can now reach the controls of the detector which was impossible with it suction cupped to the windshield on top of the dash and the long cable is no more."

--- Steve Epps